日韩高清砖码一二区

The natural water source and fire pool for LPG storage tank 6.0. 8 for fire engines shall be provided with fire engines 6.0. 9. The net width and clearance height of fire lanes shall not be less than 4.0 m.. Obstacles that hinder the operation of fire engines shall not be set up between the fire lane, factory buildings (warehouses) and civil buildings. 6.0. 10 At least two annular fire lanes shall be connected with other lanes. The end-type fire lane shall be provided with a return lane or return yard. The area of the return yard shall not be less than 12.0 m12.0 m fire truck road surface. The fire fighting operation site and the pipelines and underground ditches below shall be able to withstand the pressure of large fire engines. Traffic roads can be used for fire lanes, but the requirements for the passage and parking of fire engines should be met. 6.0. 11 The fire lane should not cross the main railway line horizontally. If it is necessary to cross horizontally, spare lanes shall be set up, and the distance between the two lanes shall not be less than the length of a train. In order to cooperate with the inspection of the fire safety passage of the workshop, the workshop shall be rectified. The overall planning and problem points are as follows. The total area of this transformation is 187.845 m2, and the transformation area and area are as follows: production office: 3.46*11.17m=39.2m2, packing room: 8.9*2.85m=25.36 m2), the area has changed from 39.2 m2 to 49.59 m2, i.e. The original production office area can accommodate 11 people (including filing cabinet and printing area), and now it can accommodate 14 people to work (including filing cabinet and printing area). Packing room: the location remains unchanged, and the overall area has the original板栗和魏铁又喝了一碗豆腐花。只是，做一名家丁并不是一件容易的事，唐伯虎从来没有做过杂务，做事之时，错误百出，再也不复当初天下第一风流才子的风范。高中女生夏澄(深田恭子)，愛慕單身英俊的老師藤堂直(渡部篤郎)，同學清一(池內博之)卻對夏澄一往情深。而當藤堂克制不住自己的感情，與夏澄淡淡的一吻之後，卻忽然不知去向。五年後，夏澄的姊姊朋子(和久井映見)將男友帶回家時，夏澄赫然發現，姊姊的未婚夫竟是朝思暮想的初戀情人藤堂。故事就圍繞這四個人執著的愛開始展開…。Also in the above picture2. Find the file path of tools and platform-tools in SDK, which will be useful later; As shown in the figure: